BFQRG - ENAMEL EQUIP. LT. GRAY
- MSDS: BFQRG
- Manufacturer: PRATT AND LAMBERT
- Product Name: ENAMEL EQUIP. LT. GRAY
- National Stock Number: 8010-00-816-9947
Product Identification
Product ID:ENAMEL EQUIP. LT. GRAY
MSDS Date:01/01/1987
FSC:8010
NIIN:00-816-9947
MSDS Number: BFQRG
Responsible Party
WICHITA, KS 67201
US
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 15%
OSHA PEL 100 PPM
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
Fraction By Weight: 15%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-BUTYL ACETATE
RTECS: EO0720000
Fraction By Weight: 8%
ACGIH TLV: 150PPM
LEAD NAPHTHENATE 36%
RTECS: OG1945000
Fraction By Weight: <5%
METHYL ETHYL KETOXIME
RTECS: PM7783000
Hazards
Effects of Overexposure:INHAL:ANEST. IRRIT OF NOSE,THROAT,EYES & POSS
DIZZ & NAUSEA.SPRA MISTS CONTN LEAD.PB POISN-HDACH,DIZ
First Aid
First Aid:INHAL:REMOV FR EXPOSR & PROVID FRESH AIR. SPLASH EYES:FLUSH
IMMED.W/LG AMTS.OF WATR F/15 MIN. SPLASH SKN-REMOV CONTAMINAT
CLOTHNG & WASH ALL AFFECT AREA W/WATR. INGESTION:DO NOT INDUCE
VOMITING.CALL A "DR" IMMED. IN ALL CASES.
Fire Fighting
Flash Point:44F TCC 7C TCC
Extinguishing Media:CARBON DIOXIDE, DRY CHEM, OR ALCOH FOAM.
Fire Fighting Procedures:SELF-CONTND BREATHING APPARAT SHLD BE AVAIL
F/FIREMEN.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECT EQPMT,SPARKS & OPN FLAME.CLOS CONTNRS MAY EXPLOD (SUP
Accidental Release
Spill Release Procedures:REMOV ALL SOURCES OF IGNIT (FLAMES,HOT
SURFACES, & ELECTR,STATIC OR FRICTIONAL SPARKS).VENTILATE AREA &
AVD BREATHING VAP.REMOV W/INERT ABSORBENT & NON-SPARKING TOOLS.
STEPS MUST BE TAKEN TO PREVNT CO NTAM OF GROUND WATER OR STREAMS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTYS.
IN COMPLIANCE W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED & BONDED TO
THE RECEIVING CONTAINER.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTNR."DO NOT USE UNTIL
ALL SAFETY PRECAUTIONS HAVE BEEN READ AND FULLY UNDERSTOOD BY THE
USER."
Exposure Controls
Respiratory Protection:USE NIOSH APPRVD MECH RESPIRAT TO REMOV
OVERSPRAY WHN SPRA OUTDR OR
Ventilation:PROVID GEN DILUT OR LOC EXHAUST VENT IN VOLM TO KEEP BELO
AC
Protective Gloves:SOLVNT IMPERMEA
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PROTECTIVE EQPMT TO PRVNT SKIN CONTCT.SEE
29,CFR 1910.1025
Supplemental Safety and Health
UNU. FIRE & EXPLOS. HAZ: WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY TO
VERY HOT SURFACES.
Chemical Properties
Boiling Pt:B.P. Text:223-344
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Stability
Stability Indicator/Materials to Avoid:YES
AVD CONTCT W/STRONG ACIDS OR AKALINE MATERIALS.
Stability Condition to Avoid:FIRES, HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING W/PRODUCE SMOKE & OXIDES OF
CARBON & LEAD
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEMS
W/O TECHNICAL SUPERVISION
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL, STATE & FED.
REGULATIONS. INCINERATE IN EPA APPRVD FACILITY. DO NOT INCINERATE
CLOS CONTNRS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.